All items are made using 100% carbon fibre & laminated using an ultra clear UV protected resin. All items are 'show the weave'. All items are finished in 2pack gloss and polished. We can modify any of these products to customer requirements or produce 'one-offs'. Contact us for details.

Click here for information on how to order from us.

There is no VAT to pay on our products

Doors
Doors - £1150 a pair
The strongest yet lightest full carbon fibre mini doors available. Made in 3 separate pieces, and bonded together on our jig to suit the spec of your mini. The hoop and inner skin are compression molded to given the best strength to weight ratio, and to maintain an even panel thickness. There is an optional channel bonded in for the window to sit in and to add extra rigidity. The standard handle, lock, and hinges can all be retained. Finished in either gloss carbon or flatted back ready for you to paint.
Weight - 1.75kg’s each
click here for a larger picture
and
click here to see how lightweight they are
Bonnets and bootlids
Clubman double skin bonnet - £875
Made using 3 layers of carbon fibre, and has all of the internals. Including carbon fibre V shaped bracing, hinge plates, prop brackets and bump shock pads. Also includes prop and powder coated spring, cup, and pin & safety latch.

Weight - 2.2kg

Saloon bonnet - £455
Made using 3 layers of carbon fibre, and can be supplied with or without the front lip.

Weight - 1.2kg

Saloon bonnet with internals - £800
Made using 3 layers of carbon fibre, and comes with new main latch, safety latch, prop and hinge plates, also can be supplied with or without the front lip.

Weight - 2kg

16v bulged bonnet - £485
Made using 3 layers of carbon fibre, and can be supplied with or without front lip bonded on. Will clear any KAD and BMW 16v head conversion.

Weight - 1.4kg

Riley Elf bonnet - £485
Made using 3 layers of carbon fibre, and will fit either Riley Elf or Wolseley Hornet variants.

Riley Elf bonnet with internals - £800
Made using 3 layers of carbon fibre, and will fit either Riley Elf or Wolseley Hornet variants. Comes complete ready to fit with latch moulding, hinge plates, prop and safety catch.

click here for larger picture

Single skin 'smoothie' bootlid - £280
Made using 3 layers of carbon fibre, this is the smoothest 'smoothy' available!.

Weight - 650g

Single skin bootlid MK1 - £270
Made using 3 layers of carbon fibre.

Weight - 650g

Single skin bootlid MK3 - £270
Made using 3 layers of carbon fibre.

Weight - 650g

Riley Elf single skin bootlid - £295
Made using 3 layers of carbon fibre, and will fit either Riley Elf or Wolseley Hornet variants.

Double skin bootlid MK3 - £550
Made using 2 layer of carbon fibre on the inside and 3 on the outside, this is exactly the same shape as the OEM item and means that it can be used with the standard locks and hinges.

Weight - 1.1 kilo

Double skin bootlid MK1 - £550
Made using 100% carbon fibre, it is exactly the same shape as the OEM item and means that it will fit on any mark of mini and can be used with the early or later type locks, also uses the hinges and support straps fitted as standard. Weight - 1.1 kilo
Riley Elf double skin bootlid - £585
Will fit either Riley Elf or Wolseley Hornet variants. Can be fitted with OEM hinges and latch plate.
Exterior and Wheel arches
Pickup / Estate / Van fuel filler - £165
Fully compression moulded to be exactly the same shape, size and thickness as the original metal piece. Includes aluminium studs bonded on the rear face to mount using the original bolt holes.
Door mirrors - £140 per pair
Made using new mirrors from Mini Spares. We make a carbon fibre shell which is finished with a 2pack gloss laquer and then bonded to the mirror casing.
Pickup and van rear bumpers - £145 per pair
Full compression moulded 3 layer laminate complete with carbon fibre brackets, and stainless fixings.
Weight - 100g each
Saloon Bumpers - £275 per pair or £150 for one
These bumpers are made using 3 layers of carbon fibre, and are supplied with all carbon brackets and stainless fixings, so can be fitted in exactly the same way as the OEM item.

Weight - 400g pair

Clubman Bumpers - £425
Our bumpers are made using 3 layers of carbon fibre, and are supplied with all carbon brackets and stainless steel fixings, so can be fitted in exactly the same way as the OEM item. The kit includes front under riders too.
Weight - 500g total
Denver wheel arches - 40mm - £295
A new arch design by us, for slim 10 inch wheels. They are 40mm wide and are made using a compression moulding technique, resulting in very strong and extremely light arches. They have a retro feel to them, and flow nicely with the Mini lines.
Weight 50g each
Denver wheel arches - 70mm - £345
A new arch design by us, designed to be used with 10 or 12inch wheels. They are 70mm wide and are made using a compression moulding technique, resulting in very strong and extremely light arches. They have a retro feel to them, and flow nicely with the Mini lines.

Weight 60g each.

Miglia arches - £430
Getting Miglia arches to fit nicely isnt easy, so we supply arches with a fitting kit, which includes: 18 hinges, rubber edging strip, stainless nuts and bolts, glue & fitting instructions. The hinged bracket can be glued to the inside of the arch using the glue supplied, so that you dont have to rivet through the glossed carbon surface. Weight - 600g
Mk1 number plate holder - £150
This is produced using a compression moulding technique, which means the carbon panel is exactly the same size and thickness as the original, and the fit is spot on. It doesnt use the original hinges but comes with a special fitting kit. Weighing only a 1/5 of the weight of the standard item, it goes perfectly with one of our carbon bootlids, and number plate lamps. Weight - 150g.
Later type number plate light - £170
This item is exactly the same shape as the original metal item, and includes all internals. Weight - 60g
Early type number plate light - £120
This item is exactly the same shape as the original metal item, and includes all internals, bulbs, lens and a rubber gasket.

Weight - 60g

Mk1 Grill & surround - £500

Mk1 Grill only - £350

Mk1 Grill surround only - £180

The perfect finishing touch to the front of Mini. Produced using a compression moulding technique, meaning the panel is exactly the same size and thickness of the original.

Mk3 Grill & surround - £575

Mk3 Grill only - £410

Mk3 Grill surround only - £195

The perfect finishing touch to the front of Mini. Produced using compression moulded carbon fibre, meaning the panel is exactly the same size and thickness of the original and is made up of a correctly formed backing plate and 9 slats. Available in internal or external release type.

Door handle scoops - £40
These are produced using a compression moulding technique. They attach in the same way as the chrome items do, we supply them with silcone sealer to hold the in place.

Weight - 10g

Headlamp rings - £170 a pair
A direct replacement for the original chrome rings, and can be fitted in 2 minutes. Complete with fixings tabs and hole for the screw.

Weight - 35g each

Rear light trims - £170 a pair
Compression moulded trim rings, that bond over the original chrome surrounds of the later type rear lights. They can be fitted in minutes even without removing the lights.

Weight - 20g each

Indicator trim - £110 a pair
Now the indicators can match our headlamp and rear light trims. Made with 100% compression moulded carbon fibre, with a metal mounting bracket.

Weight - 20g each

Headlamp domed blanks - £110 each or £190 a pair
Made using 3 layers of carbon, and have a flat backing plate to mount them with. Supplied with 4 wellnuts mounted in the correct place so they will line up with head lamp mounting holes, and stainless steel bolts.

Weight - 100g each

Indicator domes - £110 a pair
Made using compression moulded carbon fibre, and have a flat backing plate to mount them to the cars standard fixing holes.

Weight - 20g each.

Headlamp intake scoops - £230 each or £420 a pair
Made using 3 layers of carbon, and have a flat backing plate to mount them with. Supplied with 4 wellnuts mounted in the correct place so they will line up with head lamp mounting holes, and stainless steel bolts.

Weight - 180g each

Rear light blanks - £90 per pair
Made using 3 layers of carbon, and are supplied with stainless steel fixing bolts.

Weight - 30g each
Canards - £165 per pair
Made using a compression moulding technique, for a smooth finish on both sides. These are a little aero balacing item, to add some front downforce to your Mini. They attach using the moulded flange underneath.

Weight - 80g each

Interior
Boot floor - £350
Made using 4 layers of carbon fibre, this item is extremely strong yet still very light weight. Will accomodate any size of fuel take and can fit over either a subframe or a beam axle. Supplied with a template to help you cut the hole in the steel panel. Weight - 1.5kg
Dashboard - £180
A very simple race style dashboard, designed to be bolted or riveted to the original steel top and bottom dash rails. Supplied, either as a blank without any holes so you can fit any type of instruments to them, or if required, we can cut any holes needed from a template supplied. Weight - 180g
Single clock binnacle - £210
Fully compression moulded to be exactly the same shape, size and thickness as the original plastic item, and can be supplied with holes already cut or left blank.
Central instrument binnacle - £290
Fully compression moulded to be exactly the same shape, size and thickness as the original plastic item, and has the bulkheads inside for mounting the gauges to. Can be supplied with holes already cut or left blank.
Interior mirror trim - £55
A fully compression moulded interior mirror trim to fit the ‘Winguard’ non-dip type mirrors. Supplied with 3M tape to easily attach to your own mirror. Can be finished in gloss or matt.
Door step sill protectors - £95 per pair
Will fit all models of Minis and adds a nice bit of class to the inside of your car when you open the door.
Fully compression moulded and supplied with 3M adhesive tape to bond them in with.

click here for larger picture

Mk1 Steering column surround - £230
An exact copy of the original plastic item, made in two pieces and clips together using the same tabs system. All items are finished in 2pack gloss and polished.
Weight - 130g
Mk2 Steering column surround - £230
An exact copy of the original plastic item, made in two pieces and clips together using the same tabs system. All items are finished in 2pack gloss and polished.
Weight - 130g
Mk3 Steering column surround - £320
An exact copy of the original plastic item, made in two pieces and clips together using the same tabs system. All items are finished in 2pack gloss and polished.
Weight - 140g

click here for larger picture

Front doorcards - £240
These are made using 3 layers of carbon fibre, and can be supplied with holes already drilled for you or left blank. Stainless fitting bolts and well nuts can we supplied at extra cost. Weight - 350g each
Rear doorcards - £220
These are made using 3 layers of carbon fibre.
Weight - 300g each
Parcel shelf - £175
These are made using 3 layers of carbon fibre.
Weight - 300g
Engine bay
Classic Mini wiper motor bracket - £45
Compression moulded and direct replacement for the OEM item, made to exactly the same shape, size and thickness as the original. Includes the rubber seal.
Weight - 25g
Weber 40/45 heat shield - £65
Because the carburettor sits above the exhaust manifold on the A-series engine, it is prone to getting very hot, especially in modified engines. This is designed to fit neatly under a Weber 40/45 DCOE carb and reflect that heat. It is compression moulded and coated with gold heat reflective foil.
Weight - 30g
Bulkhead blanking panel - £95
A direct replacement for the OEM item, made to exactly the same shape, size and thickness as the original.
Weight - 100g
Radiator cowling - £330
These are exact copies of the OEM item, which is now very expensive to buy new. Stainless fitting bolts and well nuts are supplied. Weight - 150g
4 Blade fan - £155
Our race spec fan kit. Dyno proven to sap 4-5hp less than any other fan setup, and dramatically increased cooling efficiency, over the standard 11 blade fan. Made using 8 layers of Carbon Fibre, making them very strong and will not shatter like the OEM item.

Weight - 30g each

Top radiator brackets
1275, 998, Clubman -
£45 each
Lightweight and very strong, this add a racey feel to any engine bay. Made with 9 layers of carbon fibre, supplied with rubber gromits. Weight - 15g
SPi top radiator bracket - £40
Lightweight and very strong, this add a racey feel to any engine bay. Made with 9 layers of carbon fibre, supplied with rubber gromits. Weight - 15g

Distributor clamp A+ - £55
Made using 10 layers of Carbon Fibre, and is a direct replacement for the unnecessarily heavy OEM item.
Weight - 10g
K1100 spark plug cover - £50
The finishing touch to your BMW 16v head conversion, will fit most K1100/1200 head conversions. Fully compression moulded and finished in gloss or matt.
Universal fit airbox - £340
Designed to be used with Mini 16v head conversions. This airbox comes a flat removable carbon back plate to mount to the back of the ram pipes. There is a 3inch inlet for a filter element to be added and sit above the clutch housing.

Weight - 500g

KAD airbox - £450
A direct fit air box to be used with the KAD 16v head conversions using Jenvey throttle bodies, and will clear a standard shape saloon bonnet. Includes a moulded backing plate to clear the fuel rail and bolts on with the ram pipes. There is a 3inch inlet for a filter element to be added and sit above the clutch housing.

Weight - 500g