All items are made using 100% carbon fibre & laminated using an ultra clear UV protected resin. All items are 'show the weave'. All items are finished in 2pack gloss and polished. We can modify any of these products to customer requirements or produce 'one-offs'. Contact us for details.
Click here for information on how to order from us.
NA Exhaust trim - £95 A neat little exhaust exit trim piece to protect your rear bumper from burn marks. Will only fit with OEM rear bumpers. Supplied with 3M double sided tape. Can be finished in either gloss or matt.
NA6 & NA8 Seat belt top covers - £95 per pair
Made using 3 layers of carbon fibre with a compression moulding technique. This fits perfectly over the top of the upper seat belt bracket. Finished in 2pack gloss lacquer.
NA Slam panel cover - £195
Made using 3 layers of carbon fibre with a compression moulding technique. This fits perfectly between the front bumper and radiator top and closes the holes in the slam panel to guide more air through the radiator. Finished in 2pack gloss lacquer.
NA & NB Scuttle cover - £220 Made using 3 layers of carbon fibre, this panel neatly covers the open area in the scuttle to give a much tidier engine bay. Can be produced for RHD or LHD. Finished in 2pack gloss lacquer.
NA Sill trim - £255 per pair Made using 3 layers of carbon fibre and fully compression moulded. These sill trims are the same profile as the chrome pieces fitted to limited edition roadsters. Can be finished in gloss or matt.
NA Cam pulley cover - £190
Made using 3 layers of carbon fibre with a compression moulding technique. Designed to protect exposed cam pulleys when the camshaft cover has been cut down. This enables you to make camshaft angle adjustments and cam belt changes without needing to remove the entire cover. Finished in 2pack gloss lacquer and supplied with all stainless steel fixings.
NA Gear stick surround trim - £45 A thick compression moulded carbon fibre trim that is bolted down around the gear stick aperture. Finished in either matt or gloss 2pack lacquer and supplied with all fixings.
NA & NB Air vent rings - £95 per set of 4
These neat little carbon fibre air vent trims can be fitted in seconds and nicely modernise the interior of your MX5. Finished in either matt or gloss 2pack lacquer.
NA Boot interior panel - £280 An exact replica of the OEM panel that covers the fuel filler pipes in the boot and also holds the jack handle. Fully compression moulded laminate, and fits exactly as original.
NA Parcel shelf panels - £310 per pair A pair parcel shelf fuel pump access panels for the NA, and yes they do get hidden under the carpet, but you know they are there! Fully compression moulded and fit exactly as OEM.
All items are made using 100% carbon fibre & laminated using an ultra clear UV protected resin. All items are 'show the weave'. All items are finished in 2pack gloss and polished. We can modify any of these products to customer requirements or produce 'one-offs'. 
